The working principle of marine small anchor is as follows: the motor drives the warping shaft to rotate through the two-step deceleration of worm-worm wheel and gear, and a pair of sprockets are fitted on the warping shaft and a pair of tooth clutch are installed with the sliding key. The clutch can be axially slid through the handle to make it fit or separate with the sprocket wheel.When lifting small anchor, make the clutch and sprocket integrated, loosen the belt brake mechanism, and the mooring shaft can drive the sprocket to rotate;When anchoring, make the clutch and sprocket separate, relax the belt type brake mechanism, can use the anchor weight to throw.Release the clutch and brake the sprocket with the brake belt. The warping shaft only drives the warping drum to rotate, which can be used for warping.The sprocket shaft of the vertical electric anchor is installed perpendicular to the deck, and the motor and reducer can be arranged below the deck.This not only reduces the occupation area but also helps to protect the motor.
What is the rules for the use of small anchors?
Check before use
1. Lubrication condition of the device
2. There are no obstacles in the workplace
3. Check whether the clutch is in the correct position
4, check the reliability of the brake
1 the anchor
1.1 brake brake
1.2 loosen the chain stopper
1.3 release the brake
1.4 start the motor to anchor
1.5 after anchor lifting, brake tightly
1.6 put down the chain stopper and stop the anchor
1.7 release the brake
3.1 brake brake
3.2 loosen the chain stopper
3.3 close the clutch on the control handwheel
3.4 remove the capstan
3.5 lower the pawl and release the brake
3.6 insert the push rod into the capstan hole to anchor
4.1. Release the clutch (the clutch between the capstan and the sprocket) and brake the sprocket
4.2 wind the cable three or four times on the capstan
4.3 start motor mooring
4.4. Close the motor after ending the motor and remove the cable from the capstan
Anchor winch , is a mechanical device for throwing, lifting and Windlass, and is located at the bow of a ship.The roller on both sides of the sprocket wheel can be used for winding the cable.Accord...
how many do you know about the electric windlass ? The windlass is installed on the main deck of the bow and stern of the ship, which is used for lifting anchors and anchoring mooring lines. Windl...
Marine navigation blends both science and art.A good navigator gathers information from every available source ,evaluates this information,determines a fix ,and compares that fix with his pre-deter...
Did you know about ship navigation products before?how much do you know about it . this marine navigation product of marine VHF handheld is from juvi marine machinery company.let me introduce this ...
Do you know that cruise-ship freight price have gone up a lot Two oil tankers were attacked in the gulf of Oman on June 13, the sindh maritime website reported.A ship is Kokuka Courageous by BSM sh...
This article is about the wireless remote control search light. The scope of application： Applied to remote illumination of ship night navigation、lifesaving、warning etc,and aim searching. remot...
How about the vts vessel traffic system in juvi marine machinery company? System overview VTS system is commonly known as ship traffic management system in China, which is a set of surveillance r...
Today we have an introduce the TG27 search light in juvi company.so that our customers can understand and use it more easily. The JUVI range of searchlights incorporate the design features required...